WHAT TO CHECK ON YOUR BOAT - CHECKING YOUR RIGGING AND LINES

Extremely rotten rope on an access ladder
Now that you’ve had some good advice from my colleagues about the hull and superstructure on your boat, I want to talk to you about the rigging and also your lines and ropes. Depending on what type of boat you have you might have a lot of rigging to check.

Look at the alignment or your rigging and if you see anything wrong with it you will need to get a specialist to fix it if you’re not trained/qualified.  You really don’t want something to go wrong with it when you need it.

You’ll also need to check the rigging for bends, fraying and rust.  Again, if there’s a problem, call the specialist. If you have a sailing boat you’ll need to check the standing rigging and masts.  Make sure the mast is securely in place and that all the rigging connections to the deck are secure.  This is vital and must be checked.

When it comes to your ropes and lines, one of the things you’re looking for is damage from UV light.  The insides can go powdery so make sure you check the entire length of the rope as you also need to check for ‘surge’ damage as well.

This happens when the rope suddenly gets pulled through the cleats or the winch and get melted by the friction.  If any rope is damaged you’ll need to replace them because any strain on them could make them go suddenly.

Once you know the rigging and ropes are ok, check the cleats and winches on your boat.  Make sure the cleats are securely attached and that your winch is working correctly.  If you think there might be a problem with one of them, get them checked out in case there’s any damage to the working parts.

Next week one of my Marine Surveyor colleagues will be talking to you about the engine, electrics and gas on your boat.


Fraser Heasley – Naval Architect and Surveyor in Charge Glasgow Marine Office.

Popular posts from this blog

Challenging rescue at popular Cornish climbing spot

Teenager rescued after sand hole collapse

Label your kit at the coast